-Smart LED Conversion (SLC) Kit For Fluorescent Light (Original)

1. WHAT IS ALEC Smart LED Conversion Kit? (Play Intro Video) ?






SLC – The Best Upgrade Solution For Fluorescent Lights
An Easy 10-minute conversion process will transform your old fluorescent light into Smart LED with:

  • Adjustable Brightness – eliminate over/under lighting, improve user satisfactions
  • Automated Lighting – fade-dim or fade-OFF when you leave. Fade-ON when you enter. Super-fine, Two-stage dimming technology with programmable fade-ON and fade-OFF speed means no more shocks from sudden light-OFF
  • Maximum Energy Savings – save 80% to 95% lighting energy costs. Payback 1-3 years typical
  • Quick Conversion. – 10 minutes typical. No above-ceiling rewiring, no business disruption
  • Retain Current Fixtures -convert any fixtures using 100V to 347V AC power, English or metric size types
  • Superior Lighting – no burnt-out or flickering tube
  • Energy Codes Compliant – DLC, ETL & CSA qualified, meets ASHRAE 90.1, IECC, NECB
  • Maintenance Free – trouble-free LED and all-in-one sensors controlled technology

Super Scalable: – Start by converting 1 or a few lights in a corridor, stairwell or common room where energy are often wasted and be amazed! Go on converting as many lights as and when you want. Every smart light works independently and the controller can be upgraded in future if more capabilities are needed.

 


2. How SLC Can Benefit You (Besides Saving $$)?

(Back To Top)
  • Improved productivity – Adjust any light to ideal working brightness using handheld remote. Eliminate over- or under-lighting = zero waste.
  • Cool user experience – You will love the welcome feeling that your lights brighten up smoothly when you arrive and dim down slowly when you leave.
  • Reduced HVAC load – 1W saved by smart LED = 1W less aircon load = double energy savings!
  • Satisfaction of being GREEN – Employing new technology to eliminate energy waste. No more frequent tube and ballast replacement. Upgrading with SLC also means not sending perfectly good fixtures to landfill.

 


3. Which Type of light can SLC Convert?

(Back To Top)
  • SLC can convert most fluorescent fixtures that use 1 to 4 lamps of 2ft, 3ft, 4ft or 8ft (as well a range of metric sizes) linear fluorescent tubes. These fixtures can be currently powered by any AC voltages from 100V to 347V and they may be in the form of linear lights (with exposed fluorescent tubes) or troffers (where the tubes are enclosed inside a fixture body) as shown below:
  • Note: SLC is a COMPLETE smart LED conversion kit that includes both the light and the controller. You DO NOT need to purchase any other components (such as LED tubes) in order to complete your conversion.

  • SLC is NOT SUITABLE for converting fixtures that are designed to use incandescent or CFL light bulbs, such as sconces or downlight. Fixtures that use light bulb typically require AC phase cut dimming method can may only be controlled by lighting controller with such capability, such as the ZC002

 


4. SLC Installation & Programming

(Back To Top)

 Please visit: SLC Installation & Commissioning


 


5. SLC Conversion Kit Models:

(Back To Top)

View all available SLC Models

 


6. Real-life SLC Projects (Click pictures for details)

(Back To Top)
Emergency Corridor (Save 95%)
Underground Carpark (Save 88%)
Retail Store (Save 86%)
Public Storage Facility (Save 96%)

Click here to see more projects…

 


ADDITIONAL REFERENCES

I. Conversion versus New LED Panel/Light?

(Back To Top)
Another option for upgrading your fluorescent fixtures is to replace them with brand new LED panels or fixtures. Sure, these new lights may look cool. But, do you know that in many jurisdictions, upgrading > 10% of your lighting load would mandate installation of advanced, often costly lighting control to comply with new building energy codes such as ASHRARE 90.1, NECB or Title 24? With its built-in smart controller and sensors, the Smart LED Conversion Kit offers many advantages over the new LED panel option for upgrading an existing fluorescent fixture:

Ease of Installation
=> Lower Installation Cost.
    • Takes only 10 minutes per fixture to convert using SLC.
    • No need to remove existing fixture to install new panel.
    • No need for above-ceiling re-wiring of AC mains to accommodate lighting control system.
Lower Hardware Cost Cost only a fraction of a new dimmable LED panel light (before adding any control).
Energy Code Compliant SLC’s built-in dimming controller is fully configurable to meet any of the building energy codes (ASHRAE 90.1 NECB, Title 24 etc). No need to spend hundreds of dollars to add control hardware for compliance.
Environmentally Friendly No need to dispose off perfectly good fixture body. Save on disposal cost.
Long Lifespan Similar lifespan as standard LED panel – up to 50,000 hours when operating at full power, and carry a 5-year manufacturer’s warranty. However, thanks to the vacancy and daylight dimming by the smart controller, the LED lamps’ lifespan is expected to extend well beyond the rated full-power lifespan.
Ease of Maintenance When an LED panel fails or reaches its end-of-life, the whole panel must be replaced by a qualified electrician. With SLC, every individual component is quickly replaceable using its quick connectors. E.g. Each individual LED lamp on the SLC can be quickly detached from the low voltage DC power, and a new lamp can be replaced within < 1 minute!

II. SLC versus LED Tubes?

(Back To Top)

Please visit: SLC Vs LED Tubes

 

III. CALCULATOR: Energy Savings Examples

(Back To Top)

 

IV. Smart LED For Open Office

(Back To Top)
It should be obvious that you can really save a staggering amount of energy by auto-dimming unused spaces, especially in areas that require 24/7 lighting, such as carparks, stairwells and any pathways used for emergency exit.

However, the largest amount of wasted lighting energy in commercial space is actually in lighting up the open-plan offices (aka “open offices”) which are common throughout the world. Unlike enclosed spaces where simple on/off occupancy-based lighting control may be a code-compliant, albeit non-ideal compromise, open offices present a big challenge to lighting control because the space is shared. However, with luminaire-level lighting control attainable only with ALEC SLC, you will now be able to instantly convert the fluorescent lights (commonly used in open office lighting) to Smart LED lights and save more than 80% energy, with no disruption to your existing operation. For more details, please click the white paper link next to find out why and how to save vast amounts of otherwise wasted energy in open-plan offices.